6.
THE REMOTE CONTROLLERS
85
6.2.2
Malfunction Check Display
The following fault code display occurs when the CHECK button is pressed for 1 second.
Fault codes can be identified from the remote controller or Outdoor Unit. (LED status)
Up to 16 Indoor Units can be connected to one remote controller using group control.
A maximum of 2 fault codes for each of the 16 Indoor Units can be displayed at 2 second
intervals.
(a) RESET key. Use a pointed
object to operate the RESET key.
This will reset the remote controller
(to the initial setting). All faults
codes erased.
Unit number
Check code
(a)
Heronhill - for all your Toshiba requirements
Tel: 01823 665660
www.heronhill.co.uk
Fax: 01823 665807