Toshiba RAS-M10U2MUVG-E Скачать руководство пользователя страница 45

Страница: 45 / 81

– 45 –

2. Names and functions of indications on wireless remote controller

Display

All indications, except for clock time indication, are

indicated by pushing the START/STOP button.

• In the illustration, all indications are indicated for

explanation.

During operation, only the relevant indications will

be indicated on the remote controller.

Transmission mark

This transmission mark ( ) indicates when the

remote controller transmits signals to the indoor

unit.

Mode display

Indicates the current operation mode.

(A : Auto changeover control, : Cool, : Dry,

: Heat, : Fan only)

Temperature display

Indicates the temperature setting (17 °C to 30 °C).

When you set the operating mode to : Fan

only, no temperature setting is indicated.

FAN speed display

Indicates the selected fan speed. AUTO or one

of five fan speed levels (LOW , LOW+

, MED

, MED+

, HIGH

) can be

indicated.

Indicates

when the operating mode is

: Dry.

TIMER and clock time display

The time set for timer operation or clock time is

indicated.

The present time is always indicated except for

TIMER operation.

Hi POWER display

Indicates when the high power operation starts.

Push the Hi-POWER button to start and push it

again to stop the operation.

(PRESET) display

Indicated when memorizing the preferred

operation mode or when it has been memorized.

Also, this icon is indicated when the memorized

preferred operation is displayed.

(COMFORT SLEEP) display

Indicated during the OFF timer operation that

automatically adjusts the room temperature and

the fan speed. Each time you push the

COMFORT SLEEP button, the display changes in

the sequence of 1h, 3h, 5h, and 9h.

(QUIET) display

Indicated during the quiet operation.

Swing display

Indicated during the swinging operation where

the horizontal louver automatically moves up and

down.

NOTE

When both wired remote controller or central

controller and wireless remote controller are used,

display on the screen of wireless remote controller

may differ from the actual operation in some cases.

Содержание RAS-M10U2MUVG-E

















































































Результаты поиска

Содержание RAS-M10U2MUVG-E

Отзывы:

Бренды по названию

Популярные бренды

Toshiba RAS-M10U2MUVG-E, Руководство по обслуживанию

Результаты поиска

Содержание RAS-M10U2MUVG-E

Отзывы:

Бренды по названию

Популярные бренды