manualshive.com logo in svg

Toshiba RAS-M10U2MUVG-E, Руководство по обслуживанию

Поделиться
Скачать
Toshiba RAS-M10U2MUVG-E Скачать руководство пользователя страница 39

– 39 –

Item

13. Additional 
 Operation

Operation flow and applicable data, etc

De

s

cription

1. QUIET mode

When the [QUIET] button is pushed, the fan of the indoor unit will 
be restricted  the revolving speed at speed L until the [QUIET] 
button is pushed once again (cancel Quiet mode).

Quiet mode is the  system which, 
control the revolving speed of 
indoor fan to work constantly at 
speed L. 

Remarks :
1. Quiet mode is unable to work in 
 dry mode.
2.Quiet mode is appropriate to work 
 with less cooling load and less 
 heating load condition. Because 
 of the fan speed L may cause not 
 enough the cooling capacity or
 heating capacity.

2. Hi-POWER Mode

([Hi-POWER] button on the remote controller i

s

 pu

s

hed)

When [Hi-POWER] button is pushed while the indoor unit is in 
Auto, Cooling or Heating operation, Hi-POWER mark is indicated 
on the display of the remote controller and the unit operates as 
follows.

1. Automatic operation

 • The indoor unit operates in according to the current operation.

2. Coolin

g

 operation

 • The preset temperature drops 1˚C
  (The value of the preset temperature on the remote controller 
  does not change.)

3. Heatin

g

 operation

 • The preset temperature increases 2˚C
  (The value of the preset temperature on the remote controller 
  does not change.)

4. The Hi-POWER mode can not be 

s

et in Dry operation

Quiet mode is the  system which, 
control the revolving speed of 
indoor fan to work constantly at 
speed L. 

Remarks :
1. Quiet mode is unable to work in 
 dry mode.
2.Quiet mode is appropriate to work 
 with less cooling load and less 
 heating load condition. Because 
 of the fan speed L may cause not 
 enough the cooling capacity or
 heating capacity.

3. ECO mode

When pushing [ECO] button on the remote controller, an Economic 
operation is performed.

1) Temperature control
 Cooling operation
 The control target temperature 
 increase 1˚C per hour up to 2˚C 
 starting from the set temperature 
 when ECO has been received.
 Heating operation
 The control target temperature 
 decrease 1˚C per hour up to 2˚C 
 starting from the set temperature 
 when ECO has been received.
2) The indoor fan speed : presetting 
 [AUTO] fan speed changes to L, 
 [MANUAL] fan speed does not 
 change.
3) Compressor speed is restricted 
 to silent mode max. Hz.

4. COMFORT 

S

LEEP mode

Coolin

g

 mode

• The preset temperature will increase as ECO operation (Item 
 ECO mode)
• Push the [COMFORT 

S

LEEP] button to choose the operating 

 hours. Repeat pushing to select the hours.
 (1hr, 3hr, 5hr or 9hr)
• If the [COMFORT 

S

LEEP] button is pushed again means cancel 

 comfort sleep mode.

Heatin

g

 mode

• The preset temperature will drop down as ECO operation (Item 
 ECO mode)
• Push the [COMFORT 

S

LEEP] button to choose the operating 

 hours. Repeat pushing to select thehours.
 (1hr, 3hr, 5hr or 9 hr)
• If the [COMFORT 

S

LEEP] button is pushed again means cancel 

 comfort sleep mode.

The principles of comfort sleep 
mode are:
• Quietness for more comfortable.
• 

S

ave energy by changing room

 temperature automatically.
• The air condition can shut down 
 by itself automatically.

Remarks :
1. Comfort sleep mode will not 
 operate in dry mode and fan 
 only mode.

Содержание RAS-M10U2MUVG-E


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды