Toshiba ras-m07g3dv-e, Руководство по обслуживанию

Страница: 45 / 94

– 44 –
10. OWNER’S MANUAL and INSTALLATION MANUAL (EXCERPT)
10-1. Installation Diagram of Indoor
OWNER’S MANUAL (EXCERPT)
1
OPERATION (Green)
2
TIMER (Orange)
3
PRE.DEF (Preheat/Defrost/Self Cleaning) (Orange)
4
TEMPORARY button
Loading Batteries
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type) following the
(+) and (–) positions.
Clock Setup
1. Push by tip of the pencil.
If timer indication is flashing, go to the next step 2.
2. Press or :
Adjust the time.
3. Press : Set the
time.
Remote Control Reset
Push by tip of the pencil or
1. Remove the batteries.
2. Press .
3. Insert the batteries.
Start/Stop
1. Press to start
operation.
(A receiving beep is heard)
2. Press to stop
operation.
(A receiving beep is heard)
1
Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4
Temperature button (TEMP)
5 Fan speed button (FAN)
6 On timer button (ON)
7
Off timer button (OFF)
8 Setup button (SET)
9 Clear button (CLR)
0
Memory and Preset button (PRESET)
! One-Touch button (ONE-TOUCH)
@ High power button (Hi-POWER)
#
Economy button (ECO)
$ Quiet button (QUIET)
% Comfort sleep button (COMFORT SLEEP)
^
Set clock button (CLOCK)
& Check button (CHECK)
* Reset button (RESET)
Note:
When pushing the “SWING”, “FIX” and
“FILTER” buttons, indoor unit does not operate
and the receiving beep sound also not appear.
Press the “ONE-TOUCH” button for fully automated operation that is customized to the
typical consumer preferences in your region of the world.
The customized settings control temperature, air flow strength and other settings to
provide you alternate contact with “ONE-TOUCH” of the button. If you prefer other
settings you can select from the many other operating functions of your Toshiba unit.
Press : Start the operation.
To automatically select cooling or heating operation
1. Press : Select A.
2. Press : Set the desired temperature.
3. Press : Select AUTO, LOW , LOW+ , MED , MED+ , or
HIGH .
1. Press : Select Cool , or Heat .
2. Press
: Set the desired temperature.
3. Press : Select AUTO, LOW , LOW+ , MED , MED+ , or
HIGH .
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press : Select Dry .
2. Press : Set the desired temperature.
To automatically control room temperature and cooling (or heating) capacity for faster
cooling (or heating) operation. (except in DRY mode)
Press : Start and stop the operation.
To automatically control room to save energy (except in DRY mode)
Press : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/hour
for 2 hours (maximum 2 degrees increase).
For heating operation the set temperature will decrease.
In case of the misplaced or discharged
remote control
• Pressing the TEMPORARY button,
the unit can start or stop without
using the remote control.
• Operation mode is set on
AUTOMATIC operation, preset
temperature is 24°C and fan
operation is automatic speed.
Set the timer when the air conditioner is operating.
Daily timer allows the user to set both the ON & OFF timers and will be activated
on a daily basis.
1 SIGNAL RECEIVING UNIT DISPLAY
2 PREPARATION BEFORE USE
8 m
or
le
ss
3 REMOTE CONTROL
4 ONE-TOUCH
Setting the ON Timer Setting the OFF Timer
1
Press : Set the desired ON
timer.
Press : Set the desired OFF
timer.
2
Press : Set the timer. Press : Set the timer.
3 Press : Cancel the timer. Press : Cancel the timer.
5 AUTOMATIC OPERATION
6 COOLING / HEATING OPERATION
7 DRY OPERATION
8 Hi-POWER OPERATION
9 ECO OPERATION
10 TEMPORARY OPERATION
TEMPORARY button
11 TIMER OPERATION