Toshiba RAS-16SAV-E, Руководство по обслуживанию

Страница: 49 / 121

Item
17. QUIET mode
Operation flow and applicable data, etc. Description
When the [QUIET] button is pressed, the fan of the
indoor unit will be restricted the revolving speed at
−
until the [QUIET] button is pressed once
Remarks :
1. Quiet mode is unable to work in dry mode.
2. Quiet mode is appropriate to work with less
cooling load and less heating load condition.
Quiet mode is the system which, control the
revolving speed of indoor fan to work
constantly at lower than speed L. In addition,
noise level of indoor unit is less than usual.
speed L
again (cancel Quiet mode).
Because of the fan speed L- may cause not
enough the cooling capacity or heating
18. COMFORT
The principles of comfort sleep mode are:
x
Quietness for more comfortable.
When
x
Save energy by changing room temperature
x
The air condition can shut down by itself
Remarks:
1. Comfort sleep mode will not operate in dry
automatically.
mode
and fan only mode.
automatically.
room temperature reach setting temperature
Cooling mode
x
The preset temperature will increase
as
show on ECO operation (Item No. 9)
x
Press the [COMFORT SLEEP] button to
choose the
operating hours. Repeat
pressing to select the hours.
x
If the [COMFORT SLEEP] button is pressed
again
means cancel comfort sleep mode.
Heating mode
x
The preset temperature will drop down as
show on ECO operation (Item No. 9)
choose the
operating hours. Repeat
x
Press the [COMFORT SLEEP] button to
pressing to setect thehours.
x
If the [COMFORT SLEEP] button is pressed
again
means cancel comfort sleep mode.
(1hr, 3hr, 5hr or 9hr)
(1hr, 3hr, 5hr or 9 hr)
19. Short Timer
In the normal condition, after switching one circuit
breaker, 3-minute delay time for compressor and
1 hour for plasma air purifier are set for the
maintenance of the unit.
Purpose
To start the unit immediately for the purpose of
testing, trial...etc, short timer can be used.
maintenance of the unit.
Short Timer Setting
purifier on the remote control without
[CHK] button and hold, "00" will show
to make "00" disappear.
setting on the remote operates
front panel turns ON continuously for
1
Press [ ] button to turn the unit OFF.
2
Set the operation mode or plasma air
sending the signal to the unit.
3
Use the tip of the pencil to push the
on display, them press [SET] button
4
Press [ ] button to turn the unit ON.
5
When short timer is activated, all
immediately, besides, all indicatiors on
3 seconds.
−
48
−
capacity.
SLEEP