Toshiba nv-pack JTLI41 Скачать руководство пользователя

Страница: 9 / 58

Unified Controller nv-pack series TC-net I/O Loop PCI Express

Card JTLI41 Instruction Manual

vii

Restrictions on Application

■

This product is not developed/manufactured for use in systems involving devices that

directly affect human life (Note 1). Do not use them for such applications.

■

To use this product for systems that involve devices that significantly affect human safety

or maintenance of public functions (Note 2), special considerations (Note 3) are required in

system operation, maintenance, and management. In this case, contact one of Toshiba's

sales representatives.

(Note 1) Devices that directly affect human life include the following.



Medical devices such as life supporting devices and devices for surgical units

(Note 2) Systems that involve devices that significantly affect human safety or

maintenance of public functions include the following.



Main unit control systems of nuclear power plants, safety protection systems of

nuclear facilities, and other systems that are critical for safety



Operation control systems of mass transportation systems and air traffic control

systems

(Note 3) Special considerations indicate sufficient discussions with Toshiba's engineers to

construct a safe system (e.g. employing fool-proof design, fail-safe design, or

redundant design).

Disclaimer

■

Toshiba shall not be responsible for any damage caused by an earthquake, lightning and

wind, fire for which Toshiba is not responsible for, acts of a third party, other accidents, the

user's willful acts or negligence, misuse or use in abnormal conditions.

■

Toshiba shall not be responsible for any incidental damage (loss of business profits,

interruption of business, change or loss of stored memory) caused by use of or unable to

use of this product.

■

Toshiba shall not be responsible for any damage caused by failure to observe the

information described in the operation manual.

■

Toshiba shall not be responsible for any damage caused by malfunctions due to

combination with any connected device.

■

Toshiba shall not be responsible for any damage caused by malfunctions due to

combination with any application program created by the customer.

Requested matter
Use your cellular phone or PHS one meter or more away from the product
main unit in operation, various transmission cables, and I/O cable. Otherwise,
the system may malfunction.

Содержание nv-pack JTLI41



























































Результаты поиска

Содержание nv-pack JTLI41

Отзывы:

Похожие инструкции для nv-pack JTLI41

Бренды по названию

Популярные бренды

Toshiba nv-pack JTLI41, Инструкция по эксплуатации

Результаты поиска

Содержание nv-pack JTLI41

Отзывы:

Похожие инструкции для nv-pack JTLI41

Бренды по названию

Популярные бренды