Toshiba nv-pack JTLI41, Инструкция по эксплуатации

Страница: 21 / 58

2.1 Names and Functions of Parts
Unified Controller nv-pack series TC-net I/O Loop PCI Express
TM
Card JTLI41 Instruction Manual
7
■
Status display LED
The status display LED has LP1 which displays the status of TC-net I/O loop 1 and LP2 which
shows the state of TC-net I/O loop 2. LP1 and LP2 switch the state of ACT and LINK and display
it.
・
ACT
Indicates that TC-net I/O loop transmission is in progress. Flashes when transmitting and
receiving, and flashes during normal operation.
・
LINK
Indicates that TC-net I/O loop link is established. It lights during normal operation.
Table 2-1 Status display LED
Name(color) Description Normal Indication
LP1
(Green/Red)
LP1 Link Status and Transmit / receive status indication
Green lighting : Normal connection state
Red flashing : During transmit / receive
OFF : Unconnected state
Green lighting and
Red flashing *1
LP2
(Green/Red)
LP2 Link Status and Transmit / receive status indication
Green lighting : Normal connection state
Red flashing : During transmit / receive
OFF : Unconnected state
Green lighting and
Red flashing *1
*1 : During transmit / receive, the green lighting of LINK and the red flashing of ACT overlap and
turn to orange.
■
TC-net I/O loop connector
The TC-net I/O loop connector has LP1 connected to TC-net I/O loop 1 and LP2 connected to
TC-net I/O loop 2. LP1 and LP2 are duplex LC connectors and connect to the TC-net I / O loop via
optical fiber cable.
■
Station address setting switch
This is a switch that sets the station address in hexadecimal. The setting method is described in
"Chapter 3 Setting".