Toshiba MMK-AP0072H, Руководство по обслуживанию

Страница: 114 / 125

114
No.
S
Part name
PMV motor
Procedure
<Caution in works>
Use spanners to remove PMV motor.
As the pipes are deformed, do not use
monkey spanners. When there is 100 to the
ceiling, use a spanner below mm.)
1) Perform work of item
Q
.
2) Take off fixing screws (2 pcs) of PMV
cover, and then remove PMV cover.
3) Remove connector (6P, Blue) for PMV
motor from the electric parts box.
4) Take off bundling band of PMV motor
lead wires.
5) Using a spanner, remove PMV motor.
<Caution in reassembling>
Draw out lead wires of PMV motor from
positions same to original positions before
removing.
Remarks
T
Horizontal
grille 1) Remove shaft of the horizontal grille
from the rear plate.
(First remove the left shaft, and then
remove the other shafts while sliding the
horizontal grille leftward.)
Screw at PMV main unit side
(14mm spanner)
Screw at PMV motor side
(19mm spanner)
Ground lead wire
Bind band
P.M.V. lead wire
Max.
150
Max.
160
FILE NO. SVM-05052