Toshiba JK-UC1, Инструкция по установке и эксплуатации

Страница: 5 / 17

5
INSTALLATION
The JK-UC1 was created to be wired directly to a maximum of (32) receivers. This connections can
be done based upon a Daisy Chain Configuration (fig.1), a Star Configuration (fig. 2), or any
combination of the above. It is important to remember NOT to connect more than
(32) receivers in a
Star Configuration (parallel to one another).
Daisy Chain
Figure 2
Bus Configuration
Figure 3
The installation requires a video switcher to route the cameras output, and display it in a monitor.