Toshiba IK-CT2D, Инструкция по эксплуатации

Страница: 13 / 36

13
1
AWB (Automatic white balance)
s3ETTHE-/$%TO!7"ONTHE7(4"!,MENU
Change the C.TEMP (color temperature conversion) setting, if necessary.
(Refer to the item “7.2 (3) WHT BAL (White Balance)”.)
3200K : Appropriate for indoor shooting.
5600K : Appropriate for outdoor shooting.
s)FTHECOLORBARPATTERNISDISPLAYEDONTHESCREENORIFTHEINDEXMENUMENUISDISPLAYEDPRESSTHE;$)30=BUTTON
to disable the color bar pattern or the character display on the monitor.
s3HOOTAKNOWNWHITEOBJECTENTIRELYINTHEAREASETBYTHE!7"MENUREFERTOTHEITEMh D
#ONlRMTHECONTENTSOFTHEZONEAREASELECTEDBY!7"v ANDPUSH;$!4!50=BUTTONFORAPPROXSECOND
s4HECHARACTER!7"BLINKSONTHESCREENWHENTHE!7"STARTS
s4HECHARACTER!7"STOPSBLINKINGWHENTHE!7"lNISHESANDTHERESULTISDISPLAYEDFORAPPROXSECOND
Display Meaning
!7"/+
Automatic white balance adjustment finished correctly.
!7".'
,%6%,,/7
Automatic white balance adjustment cannot be performed because the video level is too low.
Adjust the video level by increasing the illumination or opening the lens iris.
!7".'
LEVEL HIGH
Automatic white balance adjustment cannot be performed because the video level is too high.
Adjust the video level by decreasing the illumination or closing the lens iris.
!7".'
#4%-0,/7 Automatic white balance adjustment cannot be performed because the color temperature is
too low.
If the C.TEMP is set to 5600K, set to 3200K.
If the message appears with the C.TEMP set to 3200K, change the illumination or use a color
temperature conversion filter.
!7".'
C. TEMP HIGH
Automatic white balance adjustment cannot be performed because the color temperature is
too high.
If the C.TEMP is set to 3200K, set to 5600K.
If the message appears with the C.TEMP set to 5600K, change the illumination or use the color
temperature conversion filter.
!7".' Automatic white balance adjustment cannot be performed for other reasons. Such as no white
area is included in an object, etc.
2
MANUAL (Manual white balance)
s3ETTHE-/$%TO-!.5!,ONTHE7(4"!,MENU
(Refer to the item “7.2 (3) WHT BAL (White Balance)”.)
s3HOOTAKNOWNWHITEOBJECTSETTHEWHITEBALANCEBYADJUSTINGTHELEVELSOF2'!).AND"'!).ONTHEMENU
confirming with a monitor or a vector scope.
(Refer to the item “7.2 (3) (3.2) Changing gain in MANUAL mode”.)