Toshiba IK-CT2D, Инструкция по эксплуатации

Страница: 6 / 36

6
2. COMPONENTS
(1) Camera Control Unit ...................................................................................................................... 1
(2) Accessories
(a) Instruction manual .................................................................................................................. 1
1. CAUTIONS ON USE AND INSTALLATION
s(ANDLINGTHEUNIT
$O NOT DROP JOLT OR VIBRATE AS THIS MAY RESULT IN
damage to the unit and may cause problems. Treat the
camera cables carefully to prevent cable problems,
such as breaks in the cable and loose connections.
s)NSTALLTHECAMERAINALOCATIONFREEFROMNOISE
If the camera or the cables are located near power
UTILITYLINESORA46ETCUNDESIRABLENOISEMAYAPPEAR
on the screen. In such a case, try to change the
location of the camera or the cable wiring.
s/PERATINGAMBIENTTEMPERATUREANDHUMIDITY
$ONOTUSETHECAMERAINPLACESWHERETEMPERATURE
and humidity exceed the specifications. Picture quality
will deteriorate and internal parts may be damaged.
Be particularly careful when using in places exposed
to direct sunlight. When shooting in hot environments,
depending on the conditions of the object and the
camera (for example when the gain is increased),
noise in the form of vertical strips or white dots may
occur. This is not a malfunction.
s7HENNOTUSINGTHECAMERAFOREXTENDEDPERIODS
of time.
Switch the control unit off and disconnect the power
supply.
s!VOIDUSINGORSTORINGTHECAMERAINTHEFOLLOWING
places:
Places filled with highly flammable and corrosive gas.
Places near gasoline, benzene, or paint thinner.
Places subject to strong vibration.
Places containing chemicals (such as pesticides),
rubber or vinyl products for extended periods of time.
s4HISPRODUCTISFORINDOORUSEONLY
The following descriptions are for a camera head
“IK-CT2H” connected to this camera control unit.
s$ONOTSHOOTINTENSELIGHT
If a strong light is imaged, vertical stripes or traverse
bands may appear on the screen but this is not a
failure.
s-OIRE
A moire pattern is an interference pattern generated
when two repetitive line patterns overlap. This is not a
malfunction. Eliminating the repetitive line patterns, or
aligning the two patterns, will eliminate the moire.
s7HENCLEANINGTHECAMERA
Unplug the power source before cleaning. Clean
WITH A SOFT DRY CLOTH ONLY $O NOT USE CHEMICALS OR
chemically treated cloths. Chemicals may damage
coatings and printed letters. When cleaning the lens,
use lens cleaning paper.