Toshiba GD-1300 Скачать руководство пользователя страница 51

Страница: 51 / 78

GD-1300 FAX SOFT SWITCH 5 - 27

SW33 No.8 Reception data duplex print

Used to set whether duplex print of received data is made or not.

Default: 0 (No)

SW34 No.1, No.2 Flash send wait time (North America,
U.K., Netherlands, Luxembourg, Belgium, France:
Inhibited to use)

Used to set the time from off-hook to Flash send.

Default: 1 0 (1sec)

SW34 No.3, No.4 Inhibited to use

SW34 No.5–No.8 Signal send level Max.

Used to set the max. signal send level.

Default: –8dBm

SW35 No.1 Cover function default setup

Used to set whether cover is added as default or not.

When auto clear is made by pressing [Clear All] key, the machine
returns to this setting.

Default: 0 (No)

SW35 No.2 Inhibited to use

SW35 No.3, No.4 CI delete max. OFF time

Used to set the max. wait time between detection of CI signal pulse
(number of times) and detection of the next CI signal pulse.

If CIK signal pulse is not detected within this time, the number of
calls up to that time is cleared.

Default: 0 0 (5sec) (Other than Europe) / 0 1 (10sec) (Europe)

SW35 No.5–No.8 Answering machine call number
setting

Used to set the number of calls to switch to auto receive when
answering telephone is not called in when the receive mode is set to
the answering telephone connection mode.

Setting is made in binary input.

SW36 No.1–No.8 CNG detection completion time

Used to set the time for completion of CNG signal/mute detection in
the answering telephone connection mode.

Count is made from the last call signal.

Setting is made in binary input.

Default: 45sec

SW37 No.1–No.8 Inhibited to use

SW38 No.1, No.2 Protocol monitor

Used to set whether communication protocol result is printed or not
after completion of communication.

Default: 0 0 (Not printed.)

SW38 No.3 Protocol monitor save

Used to set whether the protocol monitor of the last communication
is saved or not. When set to "Saved," the previous protocol monitor
can be printed with SIM66-21.

Default: 1 (Yes)

SW38 No.4 Inhibited to use

SW38 No.5, No.6 Flash send time (North America, U.K.,
Netherlands, Luxembourg, Belgium, France: Inhibited to
use)

Used to set the Flash send time.

Default: 0 0 (90ms)

SW38 No.7 Transfer function

Used to set whether transfer function is enabled or not.

Default: 1 (Allow)

SW38 No.8 Inhibited to use

SW39 No.1–No.3 Inhibited to use

SW39 No.4–No.8 DTMF signal send time

Used to set DTMF signal send time.

Setting is made in binary input by the increment of 10ms.

Default: 110ms (Other than Europe) / 80ms (Europe)

SW40 No.1–No.8 Number of times of recall in error

Used to set the number of times of recall when a communication
error occurs.

Setting is made in binary input.

When set to 0, recall is not made.

Default: 1 times

SW41 No.1–No.8 Number of times of recall in busy

Used to set the number of times of recall when busy tone is detected
during transmission.

Setting is made in binary input.

When set to 0, recall is not made.

Default: 2 times

SW42 No.1 Direct send recall (North America only)

Used to set whether direct send recall wait is allowed or not.

Default: 0 (Allow)

SW42 No.2 FAX receive auto select by CNG detection

Used to set whether FAX receive auto select is enabled or not when
CNG signal is detected with external telephone used.

Default: 1 (Allow)

SW42 No.3 Auto receive select in answering telephone
connection mode

Used to set whether auto receive select function in answering tele-
phone connection mode is enabled or not.

Default: 0 (Inhibit)

SW42 No.4–No.7 Inhibited to use

SW42 No.8 V.34 mode function in manual
communication

Used to set whether V.34 mode is enabled or not in manual commu-
nication.

When, however, SW43-1 is set to "0: OFF," V.34 mode is disabled
even tough this switch is set to "1: ON."

Default: 1 (ON)

SW43 No.1 V.34 mode function

Used to set whether V.34 mode is enabled or not as a capacity of
own machine in send/receive.

Default: 1 (ON)

SW43 No.2, No.3 Inhibited to use

SW43 No.4–No.6 Symbol speed mask in V.34 receive

Used to set symbol speed mask in V.34 receive.

Default: 1 0 1 (3429)

SW43 No.7, No.8 Inhibited to use

SW44 No.1–No.4 V.34 primary channel send speed

Used to set send start speed in V.34 send.

Setting is made in binary input of N in "2400 (bps) x N" in the range
of 2400bps – 33600bps.

N is set in the range of 0 – 15. When set to 0, 2400bps; when set to
15, 33600bps.

When set to 2400bps, all of SW91 No. 1 – 8 must be set as "Dis-
able".

Default: 33600bps

Default: 5 times (North America) /

6 times (Other than North America)

Содержание GD-1300















































































Результаты поиска

Содержание GD-1300

Отзывы:

Похожие инструкции для GD-1300

Бренды по названию

Популярные бренды

Toshiba GD-1300, Руководство по обслуживанию

Результаты поиска

Содержание GD-1300

Отзывы:

Похожие инструкции для GD-1300

Бренды по названию

Популярные бренды