38
Getting Started
Using the device for the first time
USB Charge
—In “Sleep mode,” you can also charge your
tablet, although more slowly, by connecting the USB power
cable to the USB port on another computer. Please make
sure your computer is turned ON while charging via USB. If
your computer is turned OFF, depending on the computer’s
specifications, the tablet battery may discharge. Toshiba
recommends that you do not use your tablet while charging
via USB as auto shut down may occur if the battery charge is
too low.
Using the device for the first time
The device is now ready for you to turn it on and begin using
it, see
“Exploring Your Device’s Features” on page 65
Turning on the power
To turn on the device:
1
Make sure any external devices (such as the USB/AC
adaptor, if you plan to use AC power rather than battery
power) are properly connected and ready.
2
Check to ensure that all slots are empty.
3
Press and hold the
Power button for several seconds.
(Sample Illustration) Turning on the power
Initial setup
The Startup screen is the first screen displayed when you
turn on your device for the first time. Follow the on-screen
instructions on each screen in order to properly install the
operating system and begin using your device.