Toshiba e-studio191f, Руководство по обслуживанию

Страница: 211 / 226

211
DP-1910F
(d) Routing-subaddress : sub-address to be used for routing (20-digit
maximum)
(e) outing-id-number : TSI to be used for routing (20-digit maximum)
(f) The End Receiving Station’s telephone number is entered after the hash
sign (#).
(3) @program to @end : Defines the Program Keys stored as a Group Key or POP Access Key to be
set in section (3) between @program to @end block.
Edit, Delete or Register the information.
(a) Program Key: P01 - P80 (Common used with the One-Touch Keys)
(b) Station-name as a POP Key : Some as (d) POP User-name.
(c) POP : The syntax used to set the Program Key as a POP Access Key.
(d) POP User-name : Name of the POP user account (40 alpha-numeric
characters maximum)
(e) POP Password : POP Password (10 alpha-numeric characters
maximum)
(f) Set whether the emails on the POP Server are deleted after retrieving
the emails.
(g) Station-name as a Group Key : Name of the station being programmed
(15 alpha-numeric characters maximum)
(h) GROUP : The syntax used to set the Program Key as a Group Key
(i) Entry-number : One-Touch, ABBR. No. or Program Keys to be
programmed001 to 200: indicates ABBR. No.s 001 to 200 (200 stations
maximum)
(001 to 920 : When the SD Memory Card is installed)
2001 to 2080 : indicates One-Touch numbers from 01 to 80
(4) This header must be deleted before the email is sent to your machine for reprogramming of Auto
Dialer.
(5) The information following the “#” sign is ignored by your machine, therefore, you can leave it as is or
delete it if you wish.
Note:
1. The email address and the telephone number cannot be programmed via email when
• Auto Dialer Number has been used for communication reservation.
• Received documents are stored in the image data memory of the machine.
• While the machine is communicating or printing.
2. When the email address and telephone number are programmed via email, a program result email is
sent back.
3. Some email applications automatically insert a line feed in the middle of a line when the number of
characters in a line exceed a specific number. Turn “Off” the automatic line feed, or define the number of
characters per line to prevent a line feed, or the data will be ignored.
8.3.1. Deleting the Entire Auto Dialer
If you wish to delete the entire Auto Dialer data in your machine, type the following command in the body of
the email message:
@command
delete
@end
This command can also be inserted before the @begin to @end block, to erase the entire Auto Dialer data
first, then reprogram it with new data.
This method will also prevent the "Overwrite Warning Message" that is sent back from your machine, when
the current Auto Dialer station is overwritten.
To erase the entire Auto Dialer data, type the following command in the “Subject” line of your email: