Toshiba E-studio 556 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 104

background image

5.TROUBLESHOOTING FOR e-Filing

e-Filing Web Utility Problems 67

5 TROUBLESHOOTING FOR e-Filing

Error messages

See the table below to troubleshoot the problem if a message appears.

Message

Corrective Action

Internal error occurred. Please restart e-Filing.

Turn the power of the equipment OFF and then ON and then try
again. If the error message is still displayed, contact your system
administrator or contact your dealer for support.

Your e-Filing Session has Timed Out. Please Restart.

Exit from e-Filing and change the session timer setting to be
longer on the Setup page of the TopAccess Administrator mode.
Then restart it.

The items have been modified.

The items are currently being modified by another user. Try again
after the other user has finished.

Cannot start e-Filing Session. The Disk is Full.

Erase the unnecessary data from the Control Panel. For
instructions on how to delete data from the Control Panel, refer to
the

e-Filing Guide

.

Cannot create a Box. The Disk is full.

Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.

Cannot create a Folder. The Disk is full.

Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.

Cannot edit the Document. The Disk is full.

Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.

Cannot insert Page. The Disk is full.

Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.

Cannot archive Documents. The Disk is full.

Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.

Cannot upload archived file. The Disk is full.

Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.

Cut failed. Disk is full.

Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.

Copy failed. Disk is full.

Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.

Paste failed. Disk is full.

Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.

Save failed. Disk is full.

Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.

Cannot create a Folder. Maximum number of folders has been
reached.

Delete unnecessary folders and create a new folder. You can
create up to 100 folders in each box.

Cannot create a Document. Maximum number of documents has
been reached.

Delete unnecessary documents and create a new document. You
can create up to 400 documents in each box and folder.

Cannot insert Page. Maximum number of pages has been
reached.

Delete unnecessary pages and insert a new page. A document
can contain up to 200 pages.

Paste failed. Maximum number of page range is reached.

Delete unnecessary pages and paste pages in the document. A
document can contain up to 200 pages.

Cut failed. The items have been deleted or modified.

Refresh the page and make sure that the item was deleted or is
currently being modified.

Copy failed. The items have been deleted or modified.

Refresh the page and make sure that the item was deleted or is
currently being modified.

Paste failed. The items have been deleted or modified.

Refresh the page and make sure that the item was deleted or is
currently being modified.

Delete failed. The items have been deleted or modified.

Refresh the page and make sure that the item was deleted or is
currently being modified.

Please enter valid password.

Enter the correct password.

A folder with the name you specified already exists. Please try
again.

Use a name that does not exist in the box.

Another user is archiving or uploading. Please try again later.

The document is being archived or uploaded by another user. Try
again after the other user has finished.

The Maximum Possible Archive Size exceeded. Archiving is not
Possible.

An archive file larger than 2 GB cannot be created. Make sure
that the archive file will be less than 2 GB by archiving smaller
groups of files instead of a large one.

The Box cannot be erased. A document contained in Box is being
used.

A document contained in the box is being used by another user.
Try again after the other user has finished.

«
...
67
68
69
70
71
...
»

Содержание E-studio 556









































































































Отзывы:

Нет отзывов

Похожие инструкции для E-studio 556

Color imageCLASS MF8580Cdw

Бренд: Canon Страницы: 750

ImageCLASS 2300

Бренд: Canon Страницы: 8

Color imageCLASS MF8580Cdw

Бренд: Canon Страницы: 750

Color imageCLASS 8180c

Бренд: Canon Страницы: 95

Бренд: Canon Страницы: 4

Бренд: Canon Страницы: 49

ImageCLASS 2300

Бренд: Canon Страницы: 156

Бренд: Canon Страницы: 193

Бренд: QMS Страницы: 24

imageCLASS D1120

Бренд: Canon Страницы: 36

ImageCLASS 2300

Бренд: Canon Страницы: 44

Бренд: Canon Страницы: 66

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 858

Бренд: Xerox Страницы: 4

DocuPrint C3055 DX

Бренд: Xerox Страницы: 20

Бренд: Canon Страницы: 18

MultiPASS MPC190

Бренд: Canon Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды