Toshiba e-studio 28, Руководство оператора

Страница: 127 / 166

1
2
3
4
5
6
7
8
9
10
11
12
7-4
WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
B
A
2. ADD PAPER SYMBOL (Cont.)
Adding Paper to the Large-Capacity Feeder (optional)
1 Pulling up the grip, draw out the large-capacity
feeder carefully until it comes to a stop.
2 Open some paper packages, take out entire reams
of paper and set them aligned in tray
A A A A A
and tray
B B B B B
.
• When setting the paper, set the paper for
A
to the right
aside, and set it for
B
to the left aside. (The paper can be
set neatly if you pile up the paper little by little alternately in
the tray
A
and
B
.) Be sure that the center lever is not open
(Refer to the labels attached in the large-capacity feeder).
• Do not add paper above the line indicated on the guide.
• Up to 2500 sheets of paper (recommended by Toshiba) can
be set.
• Paper starts being fed from the elevator tray
A
at first, and
when it runs out of paper, the paper on tray
B
moves to the
position
A
.
• Do not use creased, folded, wrinkled or damp sheets of
paper.
3
Close the cover of the large-capacity feeder.
• Close the cover completely. The elevator tray automatically
moves up to the paper feeding position.