Toshiba e-Studio 252 Скачать руководство пользователя страница 76

Страница: 76 / 362

2.HOW TO MAKE COPIES

3.Bypass Copying (Cont.)

Bypass copying on standard size paper

Copying on LD, LT, LG and ST-R size paper

Place the original(s).

Press the button of the same size as the one of the paper you have set
on the tray.

• If the paper size is not specified here, copying may be slowed down.

Place some sheets of paper with their
copy side down on the bypass tray. Align
the side guides to the paper length while
holding A.

• The message “Ready for bypass feeding” appears.
• Rear side of the side guides of the bypass tray has an indicator

for paper height. The height of the sheets must not exceed this
indicator.

• When you use more than one sheet, fan the sheets well before

setting them on the tray.

• Do not push the sheets into the entrance of the bypass feeder;

this may cause a paper jam.

When the paper size is larger, draw out the three-stage paper
holder. Raise B when you use LD or a larger size of paper.

Содержание e-Studio 252











































































































































































































































































































































































Результаты поиска

Содержание e-Studio 252

Отзывы:

Toshiba e-Studio 252, Руководство оператора, Страница: 76 / 362

Результаты поиска

Содержание e-Studio 252

Отзывы: