manualshive.com logo in svg

Toshiba e-Studio 252, Руководство оператора, Страница: 55 / 362

Поделиться
Скачать
Toshiba e-Studio 252 Скачать руководство пользователя страница 55

53

1

Placing paper in the Large Capacity Feeder (optional)

3

Push the drawer of the Large Capacity Feeder straight into the equip-
ment until it comes to a stop.

• Close the drawer completely. The elevator tray automatically moves up to the paper feeding position.

Be careful not to let your fingers be caught when closing the drawer. This could injure you.

1

Pull out the Large Capacity Feeder care-
fully.

• Pull out the drawer until it comes to a stop.

2

Place paper in A and B.

• Place paper with its copy side up. (The copy side may be 

described on the wrapping paper.)

• For the maximum number of sheets that can be set, see 

 

 P.46 

“Acceptable copy paper”.

• Be sure that the paper height does not exceed the line indicated 

on the side guide.

• Fan and jog the paper well before placing it on the drawer. Set 

the paper for A to the right side, and set that for B to the left side. 
(The paper can be set neatly if you pile it up gradually and alter-
nately in A and B.) Be sure that the center lever is not open (see 
the labels attached in the Large Capacity Feeder).

• Paper starts being fed out of the elevator tray (A) at first. When 

the paper on A has run out, the paper on B moves to the position 
of A and starts being fed.

• Do not use wrinkled, folded or damp sheets of paper.

A

B

Содержание e-Studio 252











































































































































































































































































































































































Отзывы:

Нет отзывов