manualshive.com logo in svg

Toshiba e-Studio 252, Руководство оператора, Страница: 276 / 362

Поделиться
Скачать
Toshiba e-Studio 252 Скачать руководство пользователя страница 276

274

9.BLINKING GRAPHIC SYMBOLS

3.Replace Toner Cartridge Symbol (Cont.)

9

1

Open the front cover.

2

While pushing on the latch, lower the car-
tridge holder toward you.

3

Pull the cartridge out carefully.

• If you cannot pull it straight out, pull it out rotating it clockwise.

If it cannot be pulled out, close the front cover, turn the power OFF 
and then ON again. When “Install new toner cartridge” appears, 
start the procedure again from step 1.

Never attempt to incinerate toner cartridges. Dispose of used toner 
cartridges in accordance with local regulations. 

4

Tap and shake the new toner cartridge 
well to loosen the toner inside.

Содержание e-Studio 252











































































































































































































































































































































































Отзывы:

Нет отзывов