Toshiba e-Studio 252 Скачать руководство пользователя страница 161

Страница: 161 / 362

159

After the specifying of all insertion pages is finished, press the
[ENTER] button.

Press the [BASIC] button to enter the basic menu, and then select a
paper source of the same size and direction as the sheet insertion.

• Select other copy modes as required.

Press the [START] button.

• When the Reversing Automatic Document Feeder (optional) is used, the original is scanned and copying

starts.

• When the original is placed on the original glass, perform steps 11 and 12.

Place the next original, and press the [START] button.

• Data scanning of this original starts.
• The next original will also be scanned in the same manner when you press the [YES] button on the touch

panel, and then press the [START] button on the control panel.

• Repeat this step until all the originals have finished being scanned.

After all the originals have finished being scanned, press the
[FINISHED] button.

• Copying starts.

Содержание e-Studio 252











































































































































































































































































































































































Результаты поиска

Содержание e-Studio 252

Отзывы:

Toshiba e-Studio 252, Руководство оператора, Страница: 161 / 362

Результаты поиска

Содержание e-Studio 252

Отзывы: