manualshive.com logo in svg

Toshiba e-Studio 252, Руководство оператора, Страница: 268 / 362

Поделиться
Скачать
Toshiba e-Studio 252 Скачать руководство пользователя страница 268

266

8.JOB STATUS

6.Error Code (Cont.)

8

2BF0

Reached the maxi-
mum number of pages.

Reduce the pages to be inserted, and print them.

2BF1

Reached the maxi-
mum number of docu-
ments.

Delete unnecessary documents in the box or folder.

2BF2

Reached the maxi-
mum number of fold-
ers.

Delete unnecessary folders in the box.

Printer

4030

No print enabler/invalid 
or proof and private 
printing is disabled.

Check if the Printer Kit is connected properly and inserted 
securely. Or check if the trial period is expired.

4031

HDD full for printing

Too many jobs of Private print and department code print are 
stored in HDD. 

4032

Private-print-only error

Jobs other than Private print cannot be printed. Perform Private 
printing.

4033

Printing data storing 
limitation error

Printing with its data being stored to the HDD temporarily (Proof 
print, Private print, Scheduled print, etc.) cannot be performed. 
Perform normal printing.

4034

e-Filing storing limita-
tion error

Printing with its data being stored to the HDD (print and e-Filing, 
print to e-Filing, etc.) cannot be performed. Perform normal 
printing.

4035

Local file storing limita-
tion error

Network Fax or Internet Fax cannot be sent when “Local” is 
selected for the destination of the file to save. Select “Remote” 
(SMB/FTP) for the destination.

4036

User authentication 
error

The user performing the printing has not been authenticated or 
user-registered. Perform user authentication or user registra-
tion.

4040

No authority to exe-
cute a job

The user has not been assigned the role to perform this opera-
tion by the administrator.

4050

The connection with 
the LDAP server or its 
authority setting has 
something wrong.

Ask your LDAP server administrator about it.

A221

Print job cancel

Print job is canceled. Retry the print.

A222

Print Job power inter-
ruption

Power failure occurred. Retry the print.

A290

Limit over error

Number of prints has exceeded the one specified with the 
department code and user code at the same time. Clear the 
limit counter.

A291

Limit over error

Number of prints has exceeded the one specified with the user 
code. Clear the limit counter.

A292

Limit over error

Number of prints has exceeded the one specified with the 
department code. Clear the limit counter.

Error code

Problem

What to do

Содержание e-Studio 252











































































































































































































































































































































































Отзывы:

Нет отзывов