manualshive.com logo in svg

Toshiba e-STUDIO 16P, Руководство по обслуживанию

Поделиться
Скачать
Toshiba e-STUDIO 16P Скачать руководство пользователя страница 23

2-6

Service Manual

e-STUDIO 16P

•

Standard Parallel Port Disabled – 

This error is generated when the host computer attempts to 
communicate with the printer through the standard parallel port, 
but the parallel port has been disabled either through the printer 
configuration mode, or through the MarkVision™ host utility.

•

Standard USB Port Disabled – 

USB Port Disabled – 

This error is generated when the host computer attempts to 
communicate with the printer through the standard USB port, 
but the USB port has been disabled either through the printer 
configuration mode, or through the MarkVision host utility.

MarkVision host utility.

The error recovery process for this error is:

1. If this error occurs at power–on and an ENA is attached to the 

A is attached to the 

printer, verify the ENA is properly connected.

2. When the printer is in the Ready state, press the operator panel 

button to print a menus settings page.

3. Under the “parallel menu”, look for the “parallel buffer” line. If 

this line says “disabled” and the host computer is trying to print 
using the parallel port, re–enable the parallel port using 
MarkVision or the printers configuration mode.

4. Under the “USB menu”, look for the “USB buffer” line. If this line 

B menu”, look for the “USB buffer” line. If this line 

says “disabled” and the host computer is trying to print using the 
USB port, re–enable the USB port using MarkVision or the 
printer configuration mode.

See 

“Configuration Mode” on page 3-14

 for information on using 

the printer configuration mode to enable a disabled port.

Содержание e-STUDIO 16P















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды