manualshive.com logo in svg

Toshiba e-STUDIO 16P, Руководство по обслуживанию

Поделиться
Скачать
Toshiba e-STUDIO 16P Скачать руководство пользователя страница 116

Diagnostic Aids

c Aids

3-23

e-STUDIO 16P

Parallel Port

Parallel Port lets the user enable or disable the parallel port. If the 
port is not being used, disabling it frees allocated memory to be 
used to process print jobs.

Note:  Parallel port options are not available to change in some 
network models. 

Perform the following steps to change the Parallel Port setting:

1. Enter the configuration mode. See 

See 

“Configuration Mode

de” on 

page 3-14

 for more information. 

The Parallel Port (Ready) LED comes on solid. The current 
Parallel Port setting is indicated by the Off/On/Auto (

Off/On/Auto (Press 

Button) LED. When the LED is off, the parallel port is disabled. 
When the LED is blinking, the parallel port is enabled.

2. Perform a brief button press to select the Parallel Port setting.

3. Perform a long button press. All LEDs blink once, indicating the 

setting is saved.

4. Exit the configuration mode by turning the printer power off.

Off/On/Auto Setting 

Value

Parallel port is disabled. The printer doesn’t receive 

port is disabled. The printer doesn’t receive 

data from the parallel port. 

Parallel port is enabled with a fixed buffer size. The 
buffer size is set from a utility such as MarkVision. 

Note: This LED state is only displayed if the current 
value for the Parallel Port Enabled setting is a fixed 
value. The user can’t set the value by pressing the 
button to cycle from the off value to the on value, 
that is, the button press cycles from off to auto.

Parallel port is enabled with an automatic buffer 
size. The printer determines the buffer size based 
on available memory and other printer settings. 

Содержание e-STUDIO 16P















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды