Toshiba e-studio 16 Скачать руководство пользователя страница 45

Страница: 45 / 207

2-19

Select the Alphabet Dialing.

Press :

then

Alphabet Dialing

Enter the search characters using the keyboard on

the Flip Panel and press the

key.

• Only names beginning with the search character are

presented. The names that have the search character in
the middle are not presented.

• Searching can be done irrespective of upper or lower case

characters.

Press the

( or

) key.

• For scanning on the glass, setting the original size is required

here. (e-STUDIO16 only.

See page 2-14.)

The relevant remote FAX names are displayed.

Select the destination using the

key.

SCANNING TO MEMORY

JOB NUMBER

XXX

SCANNING PAGE

YYY

RESIDUAL MEMORY

ZZZ%

SEARCH NAME

ID NAME (MAX20):

SEARCH NAME

ID NAME (MAX20):

SEARCH NAME

L.A OFFICE

LISBON OFFICE

LONDON OFFICE

Press the

key.

Содержание e-studio 16
















































































































































































































Результаты поиска

Содержание e-studio 16

Отзывы:

Toshiba e-studio 16, Руководство оператора, Страница: 45 / 207

Результаты поиска

Содержание e-studio 16

Отзывы: