manualshive.com logo in svg

Toshiba e-studio 16, Руководство оператора, Страница: 195 / 207

Поделиться
Скачать
Toshiba e-studio 16 Скачать руководство пользователя страница 195

6-3

1

2

3

4

5

6

7

9

10

11

12

8

1. RDC (Remote Diagnosis Configuration) Service

This machine has a function to receive the following services remotely. (Consult your authorized TOSHIBA
dealer for assistance in using this function.)

RDC (Remote Diagnosis Configuration)

This service enables the machine to be dialed from a service center to retrieve information and
reports, set various machine settings, program data, and upgrading the firmware in the machine.
A separate contract with the service center will be required to receive this RDC service.

Notes

•

This capability is currently under development and is not yet available. This RDC Service will be
restricted to TOSHIBA trained technicians working for TOSHIBA authorized dealers and will not
be available in all areas.

•

This function is not available in the United States.

Содержание e-studio 16
















































































































































































































Отзывы:

Нет отзывов