manualshive.com logo in svg

Toshiba e-studio 16, Руководство оператора, Страница: 124 / 207

Поделиться
Скачать
Toshiba e-studio 16 Скачать руководство пользователя страница 124

4

4-28

ENTERING & SETTING ITEMS

3. ENTERING VARIOUS FUNCTIONS (Cont.)

1

Display the COVER SHEET Menu.

Press: 

 then 

 

 

 

 

 

Cover Sheet Registration

This function enables the attachment of a cover sheet to the document being transmitted.
Prior to selecting this function for the first time, you may wish to prepare a Cover Sheet image (Logo) to
be used on the cover sheet.  See Step 3 of this procedure.

2

Enable or Disable the Cover Sheet.

• To not attach the cover sheet, press 

.

• To attach the cover sheet without image, press 

.

• To attach the cover sheet with image, press 

.

Go to Step 3.

3

Load the image document to be included on the

cover sheet and press the 

 key.

Note

• The image document should be LT (A4) size, and be placed

in LT-R (A4-R) orientation.

• In preparing a document for your cover sheet image, only a

limited area will be included as shown below.  Any data
outside the specified range will be disregarded.

COVER SHEET

1.OFF

2.ON

3.ON (COVER IMAGE)

Feed

Direction

Effective

Range

8.5 in.

(216 mm)

5.9 in.
(150 mm)

COVER SHEET

PRESS [START] TO STORE

FAX SETUP

10.COVER SHEET

11.RECOVERY TRANSMIT

12.TTI

Содержание e-studio 16
















































































































































































































Отзывы:

Нет отзывов