manualshive.com logo in svg

Toshiba e-studio 16, Руководство оператора, Страница: 18 / 207

Поделиться
Скачать
Toshiba e-studio 16 Скачать руководство пользователя страница 18

1-4

e-STUDIO20/25

 Stapler (KK-1600)

 Automatic duplexing unit

(MD-0101)

 Stack feed bypass

(MY-1016)

 Automatic document feeder (MR-2012)

 Reversing automatic document feeder (MR-3011)

 Finisher including Transportation

bridge (MJ-1011)*
(e-STUDIO20/25 only)

 Paper feed unit (MY-1015)

Large Capacity Feeder
 (KD-1010)**
(e-STUDIO20/25 only)

* The Job separator (MJ-5001) or Offset tray (MJ-5002) can be installed in place of the Finisher.
** The Paper feed pedestal (KD-1009) can be installed in place of the Large capacity feeder (KD-1010).

Furthermore, the Cassette module (MY-1017) (option for e-STUDIO20/25) can be installed in
the KD-1009.

• Print Function with Job Separator (option) Attached

When the job separator is attached, received faxes are output onto the upper tray and copied sheets
are output on the lower tray. The job separator is convenient since copies and faxes can be output
separately.

• Print Function with Finisher (option for the e-STUDIO20/25) Attached

Even if the finisher is attached, received faxes are output onto the central output tray.

• Print Function with Stack Feed Bypass (option) Attached

Even though the stack feed bypass is attached, it cannot be used for receiving faxes.

1. DESCRIPTION OF THE OPTIONAL EQUIPMENT (Cont.)

Содержание e-studio 16
















































































































































































































Отзывы:

Нет отзывов