Various settings
32
Setting the audio / Setting the recording
SAP (Second Audio Program)
This unit is fitted with an SAP broadcast system that
enables you to switch to a second audio program while
viewing a selected channel.
This function applies only when the program is broad-
cast in multiple languages through the SAP broadcast
system.
Select “SAP” and select “ON” to activate SAP. Select
“OFF” to cancel.
Listening to SAP
When the unit is turned on or a channel selection is
made, make sure “SAP” appear on the screen. This
means that “Second Audio Program” broadcasting is
available.
DOLBY DIGITAL OUTPUT
Select from the following methods of outputting the au-
dio of discs that were recorded with Dolby Digital.
DOLBY DIGITAL:
Outputs in Dolby Digital sound.
PCM:
Converts the sound to PCM
and outputs it.
NOTE:
Select PCM if you are connected to an audio amplifier
and the amplifier is not Dolby Digital compatible.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
REC SETUP
INITIAL REC TO
INITIAL REC MODE
AUTO CHAPTER
INDEX PICTURE
BLACK LEVEL (REC)
SETUP MENU
RETURN
SETUP
ENTER
BACK
END
DVD
SP
10MIN
0 SEC
Standard
SELECT
ENTER
This section describes recording settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “
REC SETUP
” from “
SYSTEM SETUP
”. For
the procedure, see steps
1
to
3
in “Using the SETUP
MENU” on page 24.
INITIAL REC TO
You can select the recording media that is first displayed
in the item “REC TO” on the timer recording screen.
Select “INITIAL REC TO” and select “DVD” or “VCR”.
INITIAL REC MODE
You can select the recording mode that is first displayed in
the item “REC MODE” on the timer recording screen.
Select “INITIAL REC MODE” and select XP, SP, LP, or SLP.
NOTES:
• For the DVD recording mode, see page 53. And for
the VCR recording mode, see page 49.
• Even if you select the recording mode by “INITIAL
REC MODE”, the recording mode on the display
window does not change. If you want to change the
recording mode, press
REC MODE/SPEED
on the
remote control.
AUTO CHAPTER
You can automatically make chapter marks on the DVD
to be recorded.
Select “AUTO CHAPTER” and select the interval be-
tween chapter marks from the below.
OFF
:
The automatic chapter is not used.
5 MIN
: The interval is set to 5 minutes.
10 MIN
: The interval is set to 10 minutes.
15 MIN
: The interval is set to 15 minutes.
30 MIN
: The interval is set to 30 minutes.
INDEX PICTURE
You can set the time that the thumbnail image is regis-
tered in the title menu of DVD-RW (VR mode).
Select “INDEX PICTURE” and select from the below.
0 SEC
: The image of a recording start point is regis-
tered.
1 MIN
: The image of a recording at 1 minute start
point will be registered.
3 MIN
: The image of a recording at 3 minutes start
point will be registered.
NOTE:
You cannot select the thumbnail image for Video mode.
BLACK LEVEL (REC)
You can set the black level for when you record.
Standard :
Records at the level of the input
source.
Enhanced :
Lowers the level 7.5IRE and records.
The unauthorized recording, use, distribution, or
revision of television programs, videotapes, DVDs
and other materials, is prohibited under the Copy-
right Laws of the United States and other countries,
and may subject you to civil and/or criminal liability.
2J41101B_E P23-33
5/28/07, 12:04 PM
32
