E
ng
lis
h
Disposal of your old product and
batteries
Following information is only valid for EU-
member States:
Disposal of products
The crossed out wheeled dust bin symbol
indicates that products must be collected and
disposed of separately from household waste.
Integrated batteries and accumulators can
be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was
placed on the market after August 13, 2005.
By participating in separate collection of
products and batteries, you will help to assure
the proper disposal of products and batteries
and thus help to prevent potential negative
consequences for the environment and human
health.
For more detailed information about the
collection and recycling programmes available
in your country,please visit our website
(
http://www.recycle-more.co.uk/
) or
alternatively please contact your retailer where
the product was purchased.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol
indicates that batteries and/or accumulators
must be collected and disposed of separately
from household waste.
If the battery or accumulator contains more
than the specified values of lead (Pb),
mercury (Hg),and/or cadmium (Cd) defined in
the Battery Directive (2006/66/EC), then the
chemical symbols for lead (Pb), mercury (Hg)
and/or cadmium (Cd) will appear below the
crossed out wheeled dust bin symbol.
By participating in separate collection of
batteries, you will help to assure the proper
disposal of products and batteries and
thus help to prevent potential negative
consequences for the environment and
human health.
For more detailed information about the
collection and recycling programmes available
in your country,please visit our website
(
http://www.recycle-more.co.uk/
) or
alternatively please contact your retailer where
the product was purchased.
General Information
This appliance may be fitted with a non-
rewireable plug. If it is necessary to change
the fuse in a non-rewireable plug the fuse
cover must be refitted. If the fuse cover is lost
or damaged, the plug must not be used until
a replacement available from the appliance
manufacturer is obtained. If the plug has to
be changed because it is not suitable for your
socket, or becomes damaged, it should be cut
off and an appropriate plug fitted following the
wiring instructions below. The plug removed
must be disposed of safely as it is hazardous if
inserted into a live socket.
1
..
Important
Safety and important notice
Warning:
•....Risk.of.overheating!.Never.install.the.product.in.a.
confined space. Always leave a space of at least
4.inches.around.the.product.for.ventilation..
Ensure.curtains.or.other.objects.never.cover.the.
ventilation.slots.on.the.product.
•....Never.place.the.product,.remote.control.or.
batteries near naked flames or other heat
sources,.including.direct.sunlight.
•....Only.use.this.product.indoors..Keep.this.product.
away from water, moisture and liquid-filled
objects.
•....Never.place.this.product.on.other.electrical.
equipment.
•....Keep.away.from.this.product.during.lightning.
storms.
•....Where.the.mains.plug.or.an.appliance.coupler.is.
used.as.the.disconnect.device,.the.disconnect.
device.shall.remain.readily.operable.
LASER
CAUTION:
USE.OF.CONTROLS.OR.ADJUSTMENTS.OR.
PERFORMANCE.OF.PROCEDURES.OTHER.THAN.
THOSE.SPECIFIED.HEREIN.MAY.RESULT.IN.
HAZARDOUS.RADIATION.EXPOSURE.
CAUTION:
VISIBLE.AND.INVISIBLE.LASER.RADIATION.
WHEN.OPEN.AND.INTERLOCKS.DEFEATED..DO.
NOT.STARE.INTO.BEAM.
LOCATION:
INSIDE,.NEAR.THE.DECK.MECHANISM.
EU Conformity Statement
This.product.is.marked.with."CE".and.complies.
therefore.with.the.applicable.harmonized.
European.standards.listed.under.the.Low.Voltage.
Directive.2006/95/EC.and.the.EMC.Directive.
2004/108/EC.
Responsible.for.CE-marking.is.TOSHIBA.
INFORMATION.SYSTEMS.(U.K.).LTD,.Toshiba.
Court,.Weybridge.Business.Park,.Addlestone.
Road,.Weybridge,Surrey,KT15.2UL,
United.Kingdom.
Pb,Hg,Cd
