1
E
ng
lis
h
6
Customizing
This. section. describes. the. various. setting.
option.of.this.Blu-ray.Disc
TM
.player..
If.the.setup.option.is.greyed.out,.it.means.
the. setting. cannot. be. changed. at. the.
current.state.
General Setting
1..Press.SETUP.button.on.the.remote.
control.The.Setup.Menu.appears.
System
Screen Saver
On
On
On
More...
More...
Move cursor key to select menu option
then use “OK” key to select
Language
Disc Auto Playback
Playback
CEC
Security
Network
Upgrade
Load Default
General Setting
SETUP
Exit
2
.
Press
to.select.an.option,.then.press
.to.access.
3
.
Press
/
to.select.a.setup.option.and
press
..
4
.
Select.the.setting.you.wish.to.change
and press OK to confirm.
-
Press
to.return.to.the.previous.menu.
[System]
To.change.the.following.system.option.
to.personalize.your.Blu-ray.Disc
TM
..player
.
•
[Screen Saver]
Turn.On.or.Off.the.screen.saver.mode.
It.helps.to.protect.the.TV.screen.
{.
On
.}.–.Set.the.screen.saver.active.
after.approximately.5.minutes.with.no.
operation.
-.The.Blu-ray.Disc
TM
.player.will.switch.to.
standby.mode.if.there.is.no.operation.
after.the.screen.saver.is.engaged.for.
approximately.15.minutes.
{.
Off
.}.–.Turn.off.the.screen.saver.
mode..
•
[Disc Auto Playback]
Turn.On.or.Off.the.disc.automatic.
playback.switching.mode.
{
On
}.–.The.disc.playback.automatically.
after.loading.
{
Off
}.–.Turn.off.disc.auto.playback.
mode.
•
[CEC]
This.player.supports.REGZA-LINK.which.
uses.the.HDMI.CEC.(Consumer.
Electronics.Control).protocol..You.can.
use.one.single.remote.control.to.control.
all.REGZA-LINK-compliant.devices.that.
are.connected.through.HDMI.connectors.
{
On
}.-.Turns.on.REGZA-LINK.features.
-With.CEC.on,.during.TV.standby.with.
the.Blu-ray.Disc
TM
.player.on,.pressing.
SETUP,.PLAY/PAUSE.will..power.on.the.
TV..When.you.turn.the.TV.off,.this.unit.
will.automatically.turn.off.
{
Off
}.-.Disables.REGZA-LINK.features.
•
[Load Default]
Reset.all.settings.of.Blu-ray.Disc
TM
.player.
to.initial.default.state.
-.Follow.the.instruction.on.the.TV.screen.
to confirm the default setting operation.
1..Select.
Load Default
.
2..A.dialogue.box.pops.up.shown.as.
below..Select.OK.
Load Default
Do you want to load default?
OK
Cancel
3.It.may.take.awhile.when.loading.
default.is.in.progress..Please.wait...
Load Default
30%
Loading default, please wait...
4..TV.will.display.as.follow:
Welcome
OK
Next
to the Toshiba Blu-ray Disc Player Setting
Wizard.
Some simple settings are suggested before you
begin. You can also access detailed settings
from the Setup Menu.
5. Press OK, enter language setting.
..Press.OK,.enter.language.setting..
Press
/
to.select.a.language.option.
Choose
Previous
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus etc.
English
OK
Next
