16
HM67 (E/F) Web 213:276
Chapter 2: Connecting your TV
Connecting a DVD player with ColorStream
®
(component video), a VCR,
and a satellite receiver
Your TV has two sets of ColorStream
®
(component video) inputs.
IN from ANT
VIDEO AUDIO
OUT to TV
L
R
R
L
OUT
IN
CH 3
CH 4
VIDEO
OUT
COMPONENT VIDEO
P
B
P
R
Y
AUDIO
OUT
L
R
S-VIDEO
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
COMPONENT VIDEO
L
R
Satellite
IN
P
B
P
R
Y
TV back panel
Stereo VCR
From antenna
Satellite receiver with component video
From satellite dish
DVD player with component video
You will need:
•
coaxial cables
•
standard A/V cables
– For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) to
VIDEO 2
on the side panel (instead of to
VIDEO 1
). Do not connect
both types of video cable to
VIDEO 2
at the same time or
the picture performance will be unacceptable.
– If you have a mono VCR, connect
L/MONO
on the TV to
your VCR’s audio out terminal using the white audio cable
only.
•
standard audio cables
•
component video cables
– You can connect the component video cables (plus audio
cables) from the DVD player or satellite receiver to either
set of
ColorStream
terminals on the TV (
HD-1
or
HD-2
).
The
ColorStream HD-1
and
HD-2
terminals can be used
with Progressive (480p, 720p) and Interlaced (480i, 1080i)
scan systems. A 1080i signal will provide the best picture
performance (1080p is not supported).
– If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to
VIDEO 2
on the side panel. If your DVD player has HDMI
video, see page 19.
To view antenna or Cable channels:
Select the
ANT
video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the
ColorStream HD-1
video input source on the TV.*
To view satellite programs using the component video
connections:
Turn on the satellite receiver. Select the
ColorStream HD-2
video input source on the TV.*
To view the VCR or view and record antenna
channels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the
VIDEO 1
video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record.
Select the
ColorStream HD-1
video input source on the TV*
to view the DVD.
*
To select the video input source, press
INPUT
on the remote control
(
-
page 23). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.
50HM67_EN.book Page 16 Thursday, March 29, 2007 11:28 AM
