46
Getting Started
Setting up your computer
NOTE: Static electricity can damage the memory module.
Before you handle the module, touch a grounded metal
surface to discharge any static electricity you may have built
up.
To avoid damaging the memory module, be careful not to
touch its pin connector (on the side you insert into the
computer).
3
Remove the memory module from its antistatic packaging.
4
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the socket.
5
Gently press down on the memory module connector until the
clips snap into place.
Don’t force the module into position. The memory module
should be level when secured in place.
Inserting the memory module
6
Replace the memory slot cover.
7
Replace the screws you removed in step 2 and tighten them.
8
Turn the computer over and reconnect any cables you
removed.
When you turn on your computer, it automatically recognizes
the additional memory. If the computer does not recognize the
memory, shut down the computer, remove the memory slot
Содержание 3490CT - Portege - PIII 700 MHz
