English
22
A
Check the correct
input
has been chosen,
S-VIDEO
or
AV
. See
AV connections
.
Why is the VCR/DVD picture in black and
white?
Q
A
Check the SCART lead connection.
Why is there a good video picture but no sound?
Q
A
Remove it by pressing
CALL
.
Why is there a message permanently on the
screen?
Q
A
Switch the television off and wait for the red LED to
extinguish before switching back on. If the problem
persists contact the Helpline.
Where there is loss of colour, picture or the
position moves, how can this be restored?
Q
Select the
Manual tuning
menu. Highlight the
station and press
OK
, then press
R
to select
Manual fine tuning
.
Using
P
or
Q
adjust to get the best picture and
sound. Press
OK
and then
EXIT
.
OK
: To store
EXIT
: To exit
MENU
: To return
Manual tuning
Manual fine tuning
1
I
22 + 2 BBC1
1
2
Below are the answers to some of the most common queries.
For more information go to
www.toshiba.co.uk
A
Check the mains switch is on and check all
connections.
Check the television is not in standby mode.
Set up
EXIT
: To exit
Language
ENGLISH
Colour
AUTO
Teletext
Why is there no sound or picture?
Q
A
Check the volume has not been turned down or
that sound mute has not been selected.
Why is there a picture but no sound?
Q
A
Check the side switch on the remote control is in
TV mode.
Check the batteries aren’t dead or inserted incorrectly.
Why doesn’t the remote control work?
Q
A
Check that
Panel lock
is not
ON
.
Why don’t the controls on the front of the
television work?
Q
A
Interference or a weak signal. Try a different
television station.
Manual fine tuning
may help.
What else can cause a poor picture?
Q
A
Make sure the VCR or DVD player is connected to
the television as shown on page 6, then select the
correct input by pressing
B
.
Why doesn’t the video/DVD being played show
on screen?
Q
A
When using an
external
source, for instance, a
poor quality video tape, if there is little or no
colour, improvements may sometimes be achieved. The
colour is factory set to
AUTO
to automatically display the
best colour system.
To check that you have the best colour:
There is a picture, but why is there little or no
colour?
Q
Select
Colour
from the
Set up
menu
.
With
S
or
R
choose between
AUTO, PAL,
SECAM, NTSC 4. 43
or
3. 58
.
1
2
Q
uestions
and
A
nswers
