47
English
HDMI CEC Menus
By activating the Enable HDMI CEC Control feature in the
HDMI CEC Control Setup
menu, individual
HDMI-
LINK
features can then be activated.
One Touch Play
The function of
HDMI CEC
will automatically
power on the television that was in standby mode
and switch the television’s input source to the
port connected with the audio/video equipment
by powering-on or playing from the audio/video
equipment.
NOTE:
This feature is dependent on the connected
equipment and television setting.
System Standby
This feature automatically switches the connected
equipment into standby when the television goes
into standby and conversely for the television to
switch into standby when connected equipment goes
into standby. It is selected in the
HDMI CEC Control
Setup
menu.
NOTE:
This feature is dependent on the connected
equipment and television setting.
System Audio Control
Using the Speaker Preference feature allows the
television’s remote control to adjust the volume or
mute the sound of the speakers connected to the
television via an AV amplifier.
Ensure that the connected AV amplifier and
HDMI
CEC
equipment are selected in the input source
selection and that the
Initial Speaker Setting
is set
to
Amplifier
in the
HDMI CEC Control Setup
menu.
NOTE:
When the AV Amplifier is switched on,
its input source changed or the volume
adjusted, the sound will be output from the
AV Amplifier’s speakers even if TV speakers
has been selected. Turn the television off
then on again to output the sound from the
TV’s speakers.
The full function may not work and is dependent on
the amplifier being used.
HDMI CEC Control Setup
This feature uses CEC (Consumer Electronics
Control) technology, and allows the control of
Toshiba
HDMI CEC
compatible equipment from the
television’s remote control.
NOTE:
Not all Toshiba products currently support
HDMI CEC
.
Equipment Control
The
HDMI CEC
mode on the television’s remote
control allows the control of connected
HDMI CEC
equipment being watched. To control the
HDMI CEC
input source, first select the equipment with H
DMI
CEC
input source selection, then switch the mode
on the remote control to
HDMI CEC
and press any
buttons.
The available functions are dependent on the
equipment connected. Not all the remote control
keys may be available. Please refer to the operation
manual for each piece of equipment connected.
Select HDMI CEC Device
1.
Press
. A list appears on screen showing
modes and all stored external equipment.
2.
The
HDMI-CEC
icon appears automatically after
detected with
HDMI CEC
compatible equipment.
>?
shown with the
HDMI-CEC
icon.
3.
J
appears showing all connected
HDMI CEC
equipment.
4.
>?
HDMI
CEC
equipment, and then press
to select.
