14
English
Using the Controls
While all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used to control some functions.
Common Interface
USB
HDMI 2 INPUTSOCKET
Power
Up / down(Volume
or Channel)
Remote sensor
RED LED - Standby
GREEN LED - Power on
Programme / Volume / Source
Headphone
Switching On
If the RED standby LED is unlit, check that the
plug is connected to the power supply. If the
picture does not appear press
on the remote
control, it may take a few moments.
To put the television into standby, press
on the
remote control. To switch on the television, press
again. The picture may take a few seconds to
appear.
For energy saving:
We recommend that you use the television with
factory settings. These settings are designed for
energy saving. Unplugging the mains plug will
reduce energy use to zero. This is recommended
when the television is not being used for long
periods, e.g. when on holiday. Reducing the
brightness of the screen will reduce energy use.
and can save money by reducing electricity bills.
NOTE:
Putting the television into standby mode
will reduce energy consumption, but will still
draw some power.
Using the Remote Control
To set up the television, you will now need to use
the on screen menus. Press
MENU
on the remote
control to see the menus.
The on-screen menu appears as a list of six
@
J
>?
and down through the menu and use
to select
the required choice. The functions of each menu
are described in detail throughout this manual.
Using the Controls on the TV
Press
to adjust volume.
Press
to display programme information.
Press
and hold until Source List is displayed,
then press
to scroll through the list until desired
input source is located.
Please always refer to the owner’s manual of the
(
NOTE:
Inserting the headphone plug will mute the
sound from all speakers.
