110
Troubleshooting
General troubleshooting
Noisy picture.
If you are watching an analog channel (off-air broadcast or Cable
TV), you can set the DNR feature to reduce visible interference in
the TV picture, see
“DNR” on page 107
Video Input Selection problems
If the Input Selection window does not appear when you press
INPUT
on the remote control or TV, press
INPUT
a second time.
This will cause a change to the next video input source and display
the Input Selection window.
Poor display color or no color.
The station may be having broadcast dificulties. Try another
channel.
Adjust the Tint and/or Color, see
“Adjusting the picture quality” on
page 74
Poor composite picture.
If the TV is connected to an external A/V device (e.g. DVD player,
video game system, set-top box, etc.) try using a ColorStream
®
or
HDMI
TM
video connection instead.
Picture and sound are out of sync.
As with all products that contain a digital display, this may occur in
rare instances, when viewing certain content (e.g. television
broadcasts, video games, DVDs). The cause may include, without
limitation, video processing within the TV, video processing in an
attached gaming system, and video processing or different
compression rates used by broadcasters in their programming.
Try the following:
v
If the TV is connected to an A/V receiver that has a
programmable audio delay feature, use this feature to help
synchronize the sound to the picture.
v
If the problem occurs only on certain TV channels, inform your
local broadcast, cable, or satellite provider.
v
Digital audio settings may not be correct. Check the
connections, see
“Connecting a digital audio system” on page 34
v
Turn off and unplug the TV from the AC wall outlet for a few
seconds and plug it back in.
