1-4: DVD MT PCB and DVD DECK (Refer to Fig. 1-4)
1-5: POWER PCB and REMOCON PCB (Refer to Fig. 1-5)
1. Put the Cabinet Back Ass'y on the bottom.
1. Remove the 7 screws (1).
2. Short circuit the position shown in Fig. 1-4 using a
2. Disconnect the following connector:
soldering iron. If you remove the DVD Deck with no
(CP501 and CP8101).
soldering, the Laser may be damaged.
3. Remove the Power PCB in the direction of arrow (A).
3. Disconnect the following connectors:
4. Disconnect the following connector:
(CP7601).
(CP2301, CP2303, CP2304, CP8501 and CP8502).
5. Remove the screw (2).
4. Remove the 3 screws (1).
6. Remove the Remocon PCB in the direction of arrow (B).
5. Remove the DVD DECK Ass'y in the direction of
arrow (A).
6. Remove the 2 screws (2).
7. Remove the Angle MPEG in the direction of arrow (B).
8. Remove the 4 screws (3).
9. Remove the DVD MT PCB in the direction of arrow (C).
DISASSEMBLY INSTRUCTIONS
Power PCB
(1)
(1)
Back Cabinet Ass'y
(1)
(1)
DVD MT PCB
(1)
(B)
(C)
(3)
(3)
Angle MPEG
DVD Deck
Pick Up PCB
(1)
(1)
(1)
(1)
Fig. 1-5
(3)
(3)
CP2304
CP2303
CP2301
Remocon PCB
(2)
CP8502
CP8501
CP501
CP8101
(A)
(B)
(1)
CP7601
1-6: DIGITAL PCB and LED PCB (Refer to Fig. 1-6)
1. Disconnect the following connector:
(CP2001).
2. Remove the 7 screws (1).
3. Remove the Digital PCB in the direction of arrow (A).
4. Remove the 2 screws (2).
5. Remove the LED PCB in the direction of arrow (B).
NOTE
1. Before your operation, please read "PREPARATION
OF SERVICING".
2. Use the Lead Free solder.
3. Manual soldering conditions
• Soldering temperature: 320 ± 20
o
C
• Soldering time: Within 3 seconds
• Soldering combination: Sn-3.0Ag-0.5Cu
4. When Soldering/Removing of solder, use the drawing
equipment over the Pick Up Unit to keep the Flux
smoke away from it.
5. When installing the DVD Deck, remove all the soldering
on the short circuit position after the connection of Pick
Up PCB and DVD MT PCB connector.
Digital PCB
Back Cabinet Ass'y
Fig. 1-6
(A)
(2)
Back Cabinet Ass'y
Short circuit using a
soldering iron.
Fig. 1-4
(2)
LED PCB
CP2001
(A)
(B)
(1)
(2)
(2)
(1) (1)
(1)
(1)
(1)
(1)
B1-5
22LV610U