HOTEL MODE FUNCTION
H O T E L
M O D E
䃂
M A X I M U M
V O L U M E
5 0
䃂
P A N E L
B U T T
O N
R E S P O N D
䃂
M E N U
B U T T
O N
R E S P O N D
䃂
I N P U T
M
O D E
S T A R T
O F F
䃂
R E S E T
5 0
E X I T : E N D
To set the Hotel mode, please follow the steps below.
1. In power on mode, set the VOLUME to minimum.
2. Press and hold the VOLUME DOWN button on the side panel.
3. Simultaneously press and hold the channel button
(7)
on the remote control for more
than 2 seconds.
4. The Hotel mode setting menu will appear.
5. Using the UP/DOWN button on the remote control, select the RESET.
Then press the ENTER button.
6. The setting items has now been returned to initial value.
Initial value
Setting value
In power on mode, set the VOLUME to minimum.
Press and hold the VOLUME DOWN button on the side panel.
Simultaneously press and hold the channel button
(7)
on the remote control for more
than 2 seconds.
The Hotel mode setting menu will appear.
7.
Setting item
5.
The Hotel mode has now been set up.
Using the UP/DOWN button on the remote control, select the desired mode.
Then press the ENTER button.
Using the LEFT/RIGHT button on the remote control, set the mode to desired setting.
6.
To set the Hotel mode, please follow the steps below.
1.
2.
3.
FUNCTION
4.
Setting of the maximum volume value.
Effective/invalid setting of main key operation. (*Note 1)
Effective/invalid setting of Menu key operation of set and remote control.
(*Note 1)
Note 1) Even if setting it to "No Respond", the service mode function are effective.
Note 2) If setting it to "OFF", it start up in same input source when you turn off the power before.
The disk cannot be taken out by setting the Tray Lock, please follow the steps below.
1. Turn Unit ON.
2. Set the DVD to the Stop Mode.
3. Press it in order of "SEPUP", "SUBTITLE", "3", "AUDIO SELECT" and "0" key of a remote control unit.
4. The On Screen Display message " " will appear.
5. The Tray Lock has now been set up.
To unlock the Tray Lock, please follow the steps below.
1. Turn Unit ON.
2. Set the DVD to the Stop Mode.
3. Press it in order of "SETUP", "SUBTITLE", "3", "AUDIO SELECT" and "0" key of a remote control unit.
4. The On Screen Display message " " will appear.
5. The Tray Lock has now been cleared.
Reset
Various settings of the Hotel mode function return initial State.
50
RESPOND
OFF
RESPOND/
NO RESPOND
OFF
1~99ch/DTV/AV
Maximum volume
HDMI/PC/DVD/
COMPONENT/
Setting of input source at power supply On. (*Note 2)
Input mode start
Panel button
TRAY LOCK
0~50
Menu button
A1-4
19DV616DG/22DV616DG
