36
Repeat playback/A-B Repeat playback
Repeat playback (DVD/VCD)
1
Press
PLAY MODE
during playback or stop mode.
2
Press
ENTER/CH LIST
repeatedly to select
“Chapter” or “Title”.
3
Press
to select “Repeat”, then press
ENTER/CH LIST
repeatedly to select a repeat
mode.
Playback automatically applies after the current track
is finished.
Note:
• If you set the repeat mode during stop mode, press
PLAY
to start playback.
4
Press
PLAY MODE
again to close the Play Mode window.
To resume normal playback, select “Off” in step 2.
Notes:
• Some discs may not work with the repeat operation.
• The repeat playback function is cancelled when the
SKIP
/
SKIP
buttons are
pressed.
A-B Repeat playback (DVD/VCD/Audio CD)
The A-B repeat function lets you repeat a specific section between two set points.
1
Press
REPEAT A-B
at the point
where you would like the playback loop to
begin. This sets your ‘A’ point.
2
When the playback reaches the point where you would like the playback loop to stop, press
REPEAT A-B
again. This sets your ‘B’ point.
This section between points A and B will
be played repeatedly in a loop until you
turned off the Repeat A-B mode.
3
To resume normal playback, press
REPEAT A-B
until ‘
Off’ appears on the screen.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may not be displayed.
• You may not be able to set A-B Repeat during certain scenes of the DVD.
• A-B Repeat does not work with an interactive DVD and JPEG CD.
[Video CD]
Mode : Normal
Repeat : Off
Play Mode
Repeat : Title
[DVD]
Play Mode
/
A
A B