17
Basic operation
Notes:
• If the built-in tuner does
not receive anything (e.g.
if no antenna is
connected) during TV-
operation, then the TV-
unit will change to standby
after approx. 15 minutes.
• This unit only support
NorDig Version 2.0 data
service.
• Press
TV/RADIO
to
switch to TV, Radio and
Data three service
categories according to
NorDig 2.0 specifications.
Channel selection
Use the
0-9
numbered buttons.
Example:
• No. 2: Press
0
and within 2 seconds, press
2
.
• No. 29: Press
2
and within 2 seconds, press
9
.
(1) Press
CH
to select a channel. This takes approx. 2 seconds. If the auto search
only stored 5 stations, only these 5 will appear. Skipped channels will not appear (see
page 15).
The Channel List shows a list of all receivable programmes. They are located in channels
1 to 99 for ATV mode and 1 to 999 for DTV mode.
(2) Press
CH LIST
to display the Channel List.
(3) Press
to select the desired channel, then press
ENTER/CH LIST
to display
the selected channel.
(4) Press
EXIT/CANCEL
to exit.
Toggle between the list of TV, Radio and Data services
(1) Press
TV/RADIO
to switch between the TV, Radio and Data mode.
(2) If you press
ENTER/CH LIST
when you are in Radio mode the channel list menu will
display the list of Radio services.
If you wish to view the list of Data services without exiting the current menu, press
TV/RADIO
once.
If you wish to view the list of TV services without exiting the current menu, press
TV/RADIO
twice.
QuickView
Press
CH RTN
to go back to the last selected channel.
Volume adjustment
Press
VOL +
/
–
to adjust the volume level. The volume level indicator shows the current
volume level. The indicator will disappear after 4 seconds of inactivity.
Mute
Press
MUTE
to switch off the sound. The TV/DVD’s sound will be turned off and “Mute”
will appear on-screen. Press
MUTE
again or
VOL +
/
–
to turn the sound on.
/
Analog Channel List
DTV Channel List
/
