Torque Fitness Fold Away Strength Trainer F3, Руководство по сборке и обслуживанию

Страница: 38 / 44

(THIS CHECKLIST MUST BE FILLED OUT IN ITS ENTIRETY AND LEFT WITH THE OWNER)
Product Serial Number _______________________________ Date Assembled _____________
Authorized Dealer _________________________ Assembler(s) __________________________
POST ASSEMBLY ADJUSTMENTS / CHECKS:
_______ Ensure ALL connections are tightened according to the instructions.
_______ Cable Tension Adjustment (see step 26): ensure that the head plate rests on the first weight plate yet there is not a lot of slop in the cable system. If
the head plate is not resting on the first plate or if there is too much cable slop in the system you can adjust cable tension in the following places (in
sequential order):
1. Where the threaded end of the Link Cable (53) attaches to the Top Boom (4) (step 22).
2. Where the threaded end of the Link Cable (53) attaches to the Pulley Bracket (26) (step 22).
3. Where the threaded end of the LC/LE Cable (54) attaches to the Floating Pulley Bracket (25) (step 23).
4. The threaded pulley bracket that is attached to the top of the weight stack selector stem (step 18).
_______ Ensure all adjustments are smooth and easy and that all pull pins easily engage and disengage in all of the adjustment holes.
_______ Ensure door wheels are adjusted so they barely contact the floor surface and doors pivot smoothly.
______ Ensure the Torque Fork™ weight adjuster easily fits easily fits in-between each of the weight plates.
_______ Make sure all the exercise movements feel solid and smooth.
_______ Make sure the Guide Rods (9) are all well lubricated as above and slide easily and smoothly.
_______ Ensure door latches engage easily and positively into the holes at the top of the door lock angle.
Fold Away Strength Trainer
TM
Assembly Checklist
Page 38