Torqeedo Ultralight 403, Руководство по эксплуатации

Страница: 56 / 84

56
Deutsch
English
4. Starting up
4.1 Fitting the drive onto the boat
Never use the motor as a fixing point for your kayak; never use the
motor as a handle for lifting or carrying.
1. Prepare the motor for fitting:
Remove the parts that belong to the Ultralight supply scope from the packaging.
Slide the boom with the clamp into the universal joint and clamp it lightly with the
two screws.
2. Select the position where the drive is to be attached to the kayak.
For this please note:
• You need a virtually flat surface on the
kayak that is big enough to attach the
mounting ball.
• The motor‘s boom must be horizontal,
i.e. run parallel to the surface of the water.
This ensures that the shaft pipe is vertical in
the water when moving forward.
• To attach the motor to thin-walled touring kayaks it is necessary to use the rubber
rest so that the engine rests on two points on the kayak (mounting ball and rubber
rest). On thicker-walled angling and leisure kayaks it may only be possible to fix the
motor with the aid of the mounting ball without a second resting point.
1.
2.