Torqeedo Ultralight 1103 AC, Руководство по эксплуатации

Страница: 52 / 66

Care and service
DE EN
Propeller 1103 AC
7
11
8 9
12 10
Fig. 80: Propeller attachment for Ultralight 1103 A/AC
7 Cylindrical pin 10 Hexagonal nut
8 Propeller 11 Inner spring washer
9 Outer spring washer 12 Motor shaft
1. Remove the cable between motor and battery.
2. Release the hexagonal nut (10) and outer spring washer (9).
3. Disconnect the propeller (8) from the motor shaft (12).
4. Pull off the cylindrical pin (7) and the inner spring washer (11) from the motor
shaft (12).
5. Connect the cable between motor and battery.
6. Check that the motor shaft is running concentrically.
7. Remove the cable between motor and battery.
8. Place the inner spring washer (11) onto the motor shaft (12).
The inner edge of the inner spring washer (11) is in contact with the motor
shaft flange.
9. Push the new cylindrical pin (7) into the motor shaft (12).
10. Slide the new propeller (8) onto the motor shaft (12) up to the stop.
11. Rotate the groove of the propeller (8) until it is congruent with the cylindrical pin
(7).
12. Push the outer spring washer (9) onto the motor shaft (12) behind the propeller
(8).
13. Hand-tighten the hexagonal nut (10) (11 Nm).
page 116 / 128