Torqeedo Ultralight 1103 AC, Руководство по эксплуатации

Страница: 40 / 66

Operation
DE EN
7.2.3 Steering
ADVICE
Never actuate the control cords at the same time, since this can lead to material
damage.
1. Pull the cord on the control triangle to the right, looking in the direction of trav-
el.
The boat turns to the right.
2. Pull the cord on the control triangle to the left, looking in the direction of travel.
The kayak/boat turns to the left.
7.2.4 Ending the trip
Switching the motor off
Fig. 76: Accelerator lever
1. Bring the accelerator lever into the neutral position.
2. Press the On/Off button for one second.
3. Remove the magnetic kill switch.
You can switch the motor off in any operating condition. The Ultralight system
switches off automatically after one hour of inactivity.
Proceed as follows after every use:
■
Take the motor out of the water.
■
In salt water or brackish water: Rinse the motor in fresh water.
7.3 Block for reversing
1. Pull the cord with the red ball handle until the reversing block engages.
2. Ensure that the motor unit is vertical to the water surface and is not tilted.
If the motor unit is not vertical to the water surface, push the kayak/boat for-
wards and repeat the first step.
3. Fix the cord in the clamp.
page 104 / 128