Torqeedo Ultralight 1103 AC, Руководство по эксплуатации

Страница: 31 / 66

Start-up
EN DE
6.6 Trimming the motor
1
3
2
Fig. 67: Trim mechanism
1 Trim rod 3 Additional trimming positions
2
Securing cotter pin
Trimming allows the motor to be positioned optimally relative to the water surface.
For this, four possible trimming positions (3) are available.
In order to position the motor optimally relative to the water surface, several steps
are required:
1. Tilt the motor upwards, see
Chapter 7.4, "Tilting the motor" .
2. Remove the securing cotter pin (2) of the trim rod (1), and pull the trim rod (1)
out of the transom bracket.
3. Insert the trim rod (1) in the desired trimming position (3) of the transom brack-
et.
The trim rod (1) must be pushed through both side walls of the transom
bracket.
4. Fix the trim rod (1) using the securing cotter pin (2).
6.7 Connecting the accelerator lever
1. Mount the accelerator lever at your desired position close to the control location.
2. Before finally screwing tight the accelerator lever, screw the plug for the connec-
tion cable, using the socket provided, to the underside of the accelerator lever.
3. Connect the data cable, see Chapter 6.8.1, "Connecting cable to Lithium ion
battery with integrated GPS receiver" .
page 95 / 128