Toro Z-Stand 105-1621, Руководство по установке

Страница: 3 / 8

Installation Instructions
3
m–5357
1
4
3
2 4
Figure 2
1. Right front frame
2. Z–Stand hub assembly
3. Bolt, 3/8 x 3–1/2 in.
4. Lock Nut, 3/8 in.
Install 100 Series Z–Stand
1. Place the foot part of stand into the Z–Stand
tube. Align holes and secure with a clevis pin
(2–5/8 in.) and hair pin cotter (Fig. 3).
2. Install Z–Stand assembly to the pivot pin with a
clevis pin (3 in.) and hair pin cotter (Fig. 3).
1
6
4
2
3
4
5
m–5359
Figure 3
1. Z–Stand tube
2. Pivot Pin
3. Clevis Pin, 3 in.
4. Hair pin cotter
5. Z–Stand foot
6. Clevis Pin, 2–5/8 in.
3. Place a thrust washer onto the pivot pin (Fig. 4).
4. Insert pivot pin into the Z–Stand hub as shown
in figure 4.
Note: When inserting the pivot pin, make
sure the position of slot in tube is as
shown in figure 3.
5. Place a thrust washer onto the pivot pin and
secure with a lynch pin (Fig. 4).
m–5358
2
4
4
5
1
3
Figure 4
1. Z–Stand
2. Pivot Pin
3. Z–Stand hub
4. Thrust washer
5. Lynch pin
Install 100 Series Z–Stand
Bracket
1. Place the Z–Stand bracket on the left front frame
as shown in figure 5.
2. Install Z–Stand bracket with a bolt
(5/16 x 3–1/4 in.) and lock nut (5/16 in.)
(Fig. 5).
Note: Install bolt as shown in figure 5.
3. Install lanyard to bracket pin. Use large loop on
lanyard (Fig. 5).
4. Install lanyard with a bolt (1/4 x 3/4 in.) and
lock nut (1/4 in.) (Fig. 5).