manualshive.com logo in svg

Toro Z Master 74028, Руководство оператора

Поделиться
Скачать
Toro Z Master 74028 Скачать руководство пользователя страница 38

•

Carefully release pressure from components with
stored energy.

•

Keep hands and feet away from moving parts.
If possible, Do Not make adjustments with the
engine running. If the maintenance or adjustment
procedure require the engine to be running and
components moving, use extreme caution.

WARNING

Contact with moving parts or hot surfaces
may cause personal injury.

Keep your fingers, hands, and clothing
clear of rotating components and hot
surfaces.

•

Check all bolts frequently to maintain proper
tightness.

Recommended Maintenance Schedule(s)

Maintenance Service

Interval

Maintenance Procedure

After the first 100 hours

• Check the wheel lug nuts.
• Adjust the parking brake.

After the first 200 hours

• Change the engine oil and filter.
• Change the deck gearbox oil.
• Change the hydraulic fluid and filter.

Before each use or daily

• Check the safety-interlock system.
• Check the engine-oil level.
• Check the seat belt.
• Check the engine-coolant level.
• Check the hydraulic-fluid level.
• Inspect the blades.
• Clean the engine and exhaust system area.
• Clean the grass and debris build-up from the machine and mower deck.

Every 50 hours

• Grease the drive U-joints and splined slip joint.
• Drain the fuel filter/water separator.
• Check the tire pressure
• Check the gearbox-oil level.
• Clean the engine-cooling system (more often in dirty and dusty conditions).
• Inspect the belts for cracks and wear.

Every 100 hours

• Check the alternator-belt tension.

Every 200 hours

• Change the engine oil and filter if not using Toro Premium Engine Oil, but any oil

meeting API classification CJ-4 or higher or as stated in Engine-Oil Specifications.

Every 400 hours

• Grease the deck-idler pivots.
• Grease the caster pivots (more often in dirty or dusty conditions).
• Service the air cleaner (More frequently in extremely dusty or dirty conditions).
• Change the engine oil and filter if using Toro Premium Engine Oil (API classification

CK-4 or higher) (more often in dirty or dusty conditions).

• Replace the fuel-filter canister for the water separator (more often in dirty and

dusty conditions).

• Check the fuel lines and connections.
• Change the deck gearbox oil.
• Adjust the parking brake.
• Change the hydraulic fluid and filter if using Mobil® 424 hydraulic fluid.

Every 500 hours

• Adjust the caster-pivot bearing.

Every 800 hours

• Inspect the engine-valve clearance.
• Change the hydraulic fluid and filter if using Toro Premium Transmission/Hydraulic

Tractor Fluid.

Every 2,000 hours

• Change the engine coolant.

38

 

Содержание Z Master 74028













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды