Toro Z Master 74028, Руководство оператора

Страница: 30 / 76

g227782
Figure 26
Side Discharge Machines
1. Bolt
4. Spacer
2. Bushing 5. Flange nut
3. Anti-scalp roller
g227784
Figure 27
Side Discharge Machines
1. Bolt
4. Spacer
2. Bushing 5. Flange nut
3. Anti-scalp roller
g227783
Figure 28
Rear Discharge Machines
1. Bolt 3. Anti-scalp roller
2. Bushing 4. Flange nut
5. For side discharge machines , torque the
flange nut to 68 to 75 N∙m (50 to 55 ft-lb).
6. For rear discharge machines , torque the
flange nut to 41 to 47 N∙m (30 to 35 ft-lb).
Adjusting the Flow Baffle
Cam Locks
For Machines with Side Discharge
This procedure is applicable only to machines with the
flow-baffle locks. Certain models have nuts and bolts
in place of the flow-baffle locks and can be adjusted
the same.
You can adjust the mower-discharge flow for different
types of mowing conditions. Position the cam locks
and baffle to give the best quality of cut.
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. To adjust the cam locks, swing the lever up to
loosen the cam lock (
Figure 29 ).
4. Adjust the baffle and cam locks in the slots to
the desired discharge flow.
5. Swing the lever back over to tighten the baffle
and cam locks (
Figure 29 ).
30