57
4.
To resolve the Day Pattern Alert, simply increase the number
of watering days for the affected station numbers. When the
condition has been resolved, the Alert message will be turned off.
To resolve the
Communication Alert
, contact WeatherTRAK
Note:
In addition to the Alert display, an audible beep tone will be
sounded every 30 seconds (if B
eep on Message
is turned on).
customer support at
1-800-362-8874
for assistance.
3.
Turn the
Lower Line
knob to view other stations that affected by
the alert condition.
This alert appears if the ET Everwhere service has failed to
communicate with the controller for a period of four consecutive
days. During this time, the controller will use the last ET data
received from the ET Everywhere service to calculate operating
requirements. After four days, the Maximum Backup ET value
entered in the
Setup
function will be used for ET calulation and
an Alert message will be displayed as shown in the following
example:
COMMUNICATION STATUS
COMMUNICATION LOST
STATUS: WARNING SEE ALERT
ALERTS WND DAY COM VAL
––– –-- –-- 002
ALERT: See Alert Menu
VALVE FAILURE
# failed valves: 02
ALERT: See Alert Menu
1.
To resolve the problem, turn the
Upper Line
dial to view the
following display:
The following Alert display example indicates a valve output problem
has occured on two stations.
Valve Alert
Communication Alert
