20
Note:
Moving the underline past Saturday will advance the display
to the next month in sequence.
Turn the
Upper Line
knob to the right to display day schedule
2.
Jan S M T W T F S
SCH A
Y Y Y Y Y – Y
3.
To remove a day from the schedule, turn the
Upper Line
knob
to select (underline) the day.
4.
5.
Turn the
Lower Line
knob to replace the Y with a dash (–). In the
Jan S M T W T F S
SCH A
Y Y Y Y
Y
Y
Y
Repeat steps 2 – 4 for all remaining months.
example below all Fridays in January are excluded for Schedule A.
per month.
1.
SELECT WATER DAYS SCH A
Days of Week
Within the
Select Water Days
menu, turn the
Lower Line
knob
to view the following display:
Note:
When the Intelli-Sense is operating in an ET-controlled mode,
it will attempt to run irrigation on all active days as needed. During
months of low ET rate, some active days may be skipped. While in
the summer months, with generally high ET rate, every active day
may be needed to provide the required amount of irrigation. If too
many days are excluded from the schedule to enable the required
irrigation to occur, a
Day Pattern Alert
condition will result.
See “
Day Pattern Alert
” on
page 56
for additional information.
